| |
|
Education
/ Science
|
|
|
|
|
|
2D Frame Analysis Dynamic Edition - 1.1
|
This application uses a highly flexible, general, finite element method for static and dynamic analysis of multi span beams, 2D Trusses and 2D Frames
Use of highly flexible, general, finite element method
Static Analysis of Multi span beams, 2D Trusses and 2D Frames
Unlimited number of Nodes and Beams
3 Degrees of freedom per Node, 6 per Beam
Compatibility with any consistent system of units
All type of boundary conditions (fixed, rollers, etc.)
Bent support conditions with respect to the global coordinate system, e.g. roller at 30 degrees in Node #4.(Nodal constraints in all directions)
Separate Coordinate System for each node
Rotational Springs
Unlimited number of translational around a node (direction and stiffness for each one)
Consideration of any translational and rotational displacements of the support conditions
No need to define first Nodes and then Beams, Nodes are produced automatically
Consideration of thermal loads
Ability to modify the beam material properties easily and fast
Static Load is given with respect to the global or local system of each beam or Node
Quick release 1 to 3 degrees of freedom at the starting or ending node of each beam in a user defined local coordinate system
Vertical and Horizontal Distribution Load on beams
Easy and interactive insertion of Arcs
Quick drawing of the model in a user friendly environment
Full GUI including zoom, pan, grid, snap options
Calculation and Drawing of the deformed shape of the given model
Analytical view of the results of analysis, the geometry, the static model, the loads etc.
Drawing of Diagrams of Axial and Shear Force and Bending Moment
Scaling to above diagrams and the deformed model interactively
Printings of analytical results, stress and displacements diagrams
Library with the major steel section shapes as well as typical concrete grades
Option to perform static or dynamic analysis
Dynamic Preferences, such as ending time of loading, integration step, damping coefficient and initial speeds - displacements
Ability to insert a math function of variable t (time)
|
| Software Requirements: |
|
No specific requirements
|
| This software is designed to run on the following operating systems: |
|
Windows 95, Windows, Windows 98, Windows Me, Windows NT, Windows 2000, Windows XP, Windows 2003, Windows Vista Starter, Windows Vista, Windows Vista Home Basic, Windows Vista Home Premium, Windows Vista Business, Windows Vista Enterprise, Windows Vista Ultimate, Windows Vista Home Basic x64, Windows Vista Home Premium x64, Windows Vista Business x64, Windows Vista Enterprise x64, Windows Vista Ultimate x64
|
| Keywords: |
|
Finite Elements, Statics, Beam, Analysis, Moment, Force, Truss, Frame, Fem, Finite Element
|
| Download Link: |
|
|
|
|
|
|
|
| Feedback Summary: |
Show All Feedback (0)
|
|
|
|
 |
|
|
|
| 2D Frame Analysis Dynamic Edition related software |
| Title / Version / Description |
Size |
License |
Price |
| FrameSolver 2D 1.0 | 4.8 MB | Shareware | $80 |  FrameSolver 2D for Windows is the easiest and the quickest way to model and analyze planar frames, trusses, and multi span beams.
FrameSolver 2D has powerful graphical modeling capabilities with a Flexible Graphical User Interface (GUI) for pre/ post-processing.
For the beginner or the professional, FrameSolver 2D is the simplest way to model and analyze beams, trusses, and frames.
Define your model with the easy-to-use interface in... |
|
| MATruss 1.2 | 1.4 MB | Shareware | $45 |  MATruss performs static strength analysis of a structure made up by truss elements.
An easy to use preprocessor make the input of model data a fast and carefree process.
A thoroughly tested and reliable solver analyses the truss model in detail and produces the data needed for design.
The calculated results are easily viewed in a fast postprocessor.
There is also the possibility to export the graphics to include in your reports.
All... |
|
| AMSES Plate 1.0 | 2.0 MB | Shareware | $760 |  FEM analysis and design of reinforced concrete slabs according to Eurocode 2. The program uses enhanced user interface for the geometry and load input. The load is organised in actions (load groups) which are combined in load cases. No special care is needed for mesh, since the mesh is automaticaly generated. Kirchhoff (thin plate theory) internal forces are calculated, principal moments, design moments and reinforcement areas. |
|
| FrameMaster 3.1 | 969.1 KB | Shareware | $500 | | FrameMaster is a FEM-program(Finite Element Method) that helps you dimension almost any kind of construction: roof-trusses, floors, walls, bridges, furniture, shafts and much much more. FrameMaster is both one of the cheapest and most powerful program in its category. FrameMaster is used of both amateurs and professionals. Avoid over dimensioning, instead model your construction in FrameMaster, push a button, and the program will tell you if... |
|
| Universal Mechanism Lite 4.0 | 17.7 MB | Freeware | | | The program is intended for simulation of kinematics and dynamics of planar and spatial mechanical systems.
The program is intended for using by students and teachers for educational purposes as well as design engineers for express analysis of designed mechanisms in their everyday work. It does not need from the user any special knowledge and operates with well-known for any design engineer terms and ideas. UM Lite supports data import... |
|
|
|
| Other popular software in this category |
| Title / Version / Description |
Size |
License |
Price |
| XLSTAT (Win) 2007 | 20.9 MB | Shareware | $395 |  XLSTAT is a complete analysis and statistics add-in for MS Excel. It includes regression (linear, logistic, nonlinear), multivariate data analysis (PCA, DA, CA, MCA, MDS), correlation tests, parametric tests, non parametric tests, ANOVA, ANCOVA and much more. Complementary modules are available for 3D visualization, Preference Mapping, Time series analysis. |
|
| SurGe 6.30 | 2.5 MB | Shareware | $20 | | SurGe is a computer program which enables to generate surface as an interpolation (approximation) function of two independent variables. The program has the following basic features:
> Implements an interpolation / approximation method called ABOS.
> Basic input is a simple ASCII file containing X, Y and Z coordinates of points irregularly spaced in some region.
> The surface can be defined not only by points, but also by spatial... |
|
| Sound Generator 3.12 | 286.3 KB | Shareware | $59 |  The audio frequency sinusoidal signal generator is intended for adjusting and measuring parameters of audio equipment. Works with 16, 24 and 32 bit sound cards at sampling rate up to 384 kHz. Independent channels frequency and amplitude controls. Adjustable phase shift between channels. A step of frequency setting is 0.00001 %; level - 0.001 dB; phase - 0.001 degree. The minimum coefficient of nonlinear and intermodulation distortion,... |
|
| Shell and Tube Heat Exchanger Design 1.4.1 | 5.4 MB | Shareware | $59.99 |  Step by step shell and tube heat exchanger design and analysis software
Below is a list of some functions:
1-Step by step calculation
2-Estimate the Physical properties of more than 1450 components; the database has the ability to estimate Thermal Conductivity, Density, Heat Capacity and Viscosity. The database also included critical properties, boiling and melting points.
3-Estimate mixture properties. (ALL ESTIMATION METHODS CURRENTLY... |
|
| BrainStimPro Binaural Generator 4.0 | 3.2 KB | Shareware | $35 |  Binaural Brainwave Stimulator 4.0 16 color strobe sets 300 Options (BrainStimPro) is a Professional Medical Brainwave Tuning tool for medical personal, Using adjustable freq, base frequency, modulation, duration, programmable color strobe, 4 wave forms, Freq Ramps, audio to visual pulse ratio adjust and programmable freq and color sets, plus 24 programmable freq. buttons. While being setup for use by laymen as well offering ease of use in... |
|
|
|
|
| |
